Water alone biodegrades the glitter?

Core principle: “No microorganisms = no biodegradation.” All ranges only start breaking down when environmental bacteria or other microbes are present along with moisture.Shelf-life proof: In the dry jar—or in an alcohol or oil base—the particles stay intact for years because those cosmetic systems keep microbe counts near zero inside the packaging. The cleaner it's kept, the longer it will last.So, whether it’s any version of loose glitter in a jar or future PURE & V3 in a pre-mixed gel, stability comes from the absence of microbes + water.

Natural water ≠ cosmetic-grade water?

Environmental water (rivers, lakes, soil run-off) teems with microbes, so when Bioglitter® ends up there it finally has both moisture and a robust bacterial community—biodegradation begins.Inside the jar or a preserved formula the picture is very different: cosmetics are blended with purified or de-ionised water and must stay below about 1 000 colony-forming units per gram (500 CFU g-¹ for eye products) under global microbiological-safety rules; preservatives keep counts near zero. PMCBioglitter® itself is inert until both moisture and an active microbial load are present. Kept dry—or suspended in alcohol, oil or a well-preserved gel—it remains stable for years.

What is Styrene/Acrylates Copolymer?

This ultra-thin lacquer layer originally used in Sparkle V1 locks the microscopic aluminum film to the cellulose core while still passing all ISO 14851/52 biodegradability tests. HOLO, Sparkle V2 & V3 use even more nature-derived or EU-compliant binders (Pullulan in V2 & HOLO, Polyvinyl Butyral + copal in V3) to boost biodegradation speed, color-bleed resistance and solvent stability.All essential for the sparkle of the aluminum to remain attached to the cellulose core.(PURE does not have it because it does not contain the aluminum.)

Version-to-version differences?

SPARKLE V1 / V2 / V3 and HOLO – all share the same cellulose core; the newer version binders simply improve colour “bleed” resistance in water and solvents.PURE – aluminium-free, with no laquer binders needed, but follows the same biodegradation trigger.

You don't use Sparkle V3 yet?

Sparkle V3 is Bioglitter’s newest metallic range, built to survive anything you throw at it, so it’s perfect for ready-made gels, polishes and liquid soaps. It’s also fully compliant with the EU’s 2023/2055 micro-plastic rule and remains brilliantly reflective thanks to its bleed-resistant lacquer. Right now V3 comes in just four classic shades—Silver, Platinum, Dark Gold and Copper. Our current Moon Shatter line focuses on coloful loose blends you mix with aloe or gloss bonder just before use to maximize versatility.However, we are already prototyping lip-gloss wands and festival ready glitter paste, and when those formulas are ready, SPARKLE V3 along with PURE will headline the launch. In short: limited colours and our “mix-your-own” philosophy keep V3 off today’s menu—but it’s front-of-queue for our next evolution.

Applying BioGlitter

HOW TO APPLY YOUR BIOGLITTER

Pick Your Base

Bonder / Gel	Best For	Where to Buy
Aloe Gel Bonder	Lightweight, dries tack‑free—ideal for cheeks, neckline, arms, legs	Shop ➜ Aloe Gel Bonder
Eyes & Lip Bonder	Crystal‑clear high‑shine bonder for lids & lips (can also be used anywhere else for stronger bonds)	Shop ➜ Eyes & Lip Bonder
Any Vegan Hair Gel	Strong hold on hair, beard, booty	At local drugstore or use one you already own

(Both Moon Shatter bonders are cosmetic‑grade, vegan & preservative‑free. Choose the one that matches where you’ll sparkle, or get both as a 'cover-all bases' strategy.)

Tools You Probably Already Have

Flat synthetic shader brush or small silicone paddle
Clean fingertip or disposable lip brush for detail work
Mixing surface: back of hand, metal palette, saucer plate or clean jar lid
For hair/beard: bamboo toothbrush or spoolie
Wet-naps. cotton swabs/tape for cleanup

1 — FACE & BODY APPLICATION

Two Easy Techniques

Technique	When to Use	Quick Steps
Premix & Pat	Precise application (festival cheeks, glossy lids, full glitter lip)	1) Scoop a pea‑size dab of Aloe Gel or Eyes & Lip Bonder on palette. 2) Use a teaspoon to sprinkle in loose Bioglitter until mixture looks saturated but spreadable (≈ ½ glitter, ½ gel). 3) Fold with brush or use non serrated butter knife. 4) Spread onto skin or lips; layer design to taste.
Lay & Press	For larger coverage and loose design	1. Apply a thin coat of bonder on target skin area, it should feel wet to touch but not runny. 2) Use a small teaspoon or any other scooper to sprinkle glitter onto the wetted skin. 3) Gently press the glitter that now sits on the tacky gel—patting down, not sweeping. 4) Apply more if needed.

Tip: It's best not to apply more bonder after the first glitter application, so getting the skin suitable wet is key. The wetter the skin is with bonder, the more glitter will stick. If you need extra‑long hold—especially on hair, beard, or booty—swap in vegan hair gel and follow the same steps. Treat your first few applications as test runs to dial in the perfect ratio and technique for your look.

2 — HAIR, BEARD & BOOTY APPLICATION

Use any vegan hair gel for the strongest stay‑put sparkle.

Method A — Gel Mix (Quick & Uniform)

Spoon ~30 mL (1 oz) hair gel into a bowl.
Add Bioglitter in 1/4 teaspoon increments; fold together. Apply 1/4 tsp more if needed until you have the consistency you like.
Apply with comb, makeup silicone brush, or fingers.
Layer more mix until coverage is perfect.
Optional: press extra dry glitter on top for extra dimension.

Method B — Glitter Dusting (Precision & Less Mess)

Pour 2 tsp Bioglitter into a bowl (will serve to catch falling glitter).
Brush hair gel onto target area (comb for hair/beard, silicone brush for skin).
Hold glitter bowl under the area and sprinkle glitter—excess falls back into bowl.
Repeat in all desired areas: gel → sprinkle until fully covered.

Hair‑Roots Quick Look

Part hair where you want sparkle.
Toothbrush on hair gel along part.
Sprinkle glitter; press gently.
Light mist of hairspray to lock.

REMOVAL & CLEANUP

Area	How to Remove
Face & Lips	Massage with any oil‑based cleanser or makeup balm, then rinse with warm water & mild soap. Wet wipes tend to smear glitter—use only if last resort or for first pass clean.
Hair, Beard, Body	Rinse with warm water & mild shampoo/body wash. A few foil flecks may linger—will brush out next day or when hair dries.
Tools	Wipe with a drop of kitchen oil to dissolve Eyes & Lip Bonder gel, then wash with warm soapy water. Aloe and Hair Gel wash out with just water.

SAFETY & STORAGE

Cosmetic Bioglitter is eye‑safe but keep particles outside the waterline.
Under‑3s: Avoid use on toddlers—they tend to rub eyes & mouths.
Always use clean tools to keep jars microbe‑free; left over premix could last a couple of weeks. If you feel it has been contaminated, dispose.
Store glitter and bonders tightly closed, away from heat, moisture & direct sun; shelf life 24 months.
If irritation occurs, rinse with sterile saline and discontinue use.

That’s it! Grab your bonder, pick your glitter, and sparkle responsibly.

It Biodegrades? Prove it!

Bioglitter® clears both ISO 14851/14852 freshwater tests and TÜV Austria’s “OK biodegradable WATER” audit—meaning >90 % break-down in 56 days, proved in triplicate by an ISO-17025 lab with extra ecotoxicity screens. TÜV calls this seal “the highest level of its kind in the world,” so it’s widely viewed as the gold standard for showing a product really vanishes in rivers and lakes.

Search